Why does my Ring Spotlight Cam Plus (battery) keep needing setting up again?

The short answer

Re-pairing means unmounting a camera that is often on a wall or under a soffit. Repeated re-pairing nearly always means the gadget is losing its place on the network, not that it is faulty.

What's happening underneath

Wi-Fi 4 or Wi-Fi 5 client, usually a single antenna, sending a steady video upload rather than short bursts. Safe to put on a separate IoT network once it is set up, as long as you accept you may lose local live view from the app.

Source: Manufacturer documentation

Try these, in this order

• • Read the signal in the app at the mounting spot before you screw anything up.
• • A camera fighting for signal transmits harder and flattens its own battery — fix the signal first.
• • Aim for a mesh box or access point on the wall nearest the camera, indoors.
• • Avoid pairing through a plug-in extender; it hides the real signal problem.
• • Check the signal where the gadget actually lives, not where you're standing.
• • Move the router off the floor and out of any cupboard before buying anything.
• • Put the gadget and your phone on the same Wi-Fi name.

Setting it up again properly

• • Stand next to your router while you set it up, then move the gadget to where it lives.
• • Put your phone on the 2.4 GHz network name for the setup, or use one name for both bands so the phone can follow.
• • If your router splits bands into two names, turn the 5 GHz one off for five minutes rather than fighting it.
• • Turn mobile data off on your phone during setup — some apps quietly use it and never find the gadget.

When it's worth spending money

An outdoor-rated access point or a mesh box in the back room, not a bigger battery.