Reviewed September 2026
Sonos Beam (Gen 2) + Sky Broadband Hub
Works well together
Independent WiFiXpert score. No sponsorship, no shopping link, no manufacturer input.
We see very few problems putting a Sonos Beam (Gen 2) on a Sky Broadband Hub. Set it up on the main Wi-Fi name and it should simply stay put.
What it looks like when it goes wrong
- Occasional drop-outs after a power cut or a router restart.
Do these, in this order
- 1
Restart the router, wait two minutes, then restart the gadget.
- 2
Run a network cable from the router or a mesh box to the Beam — it is the single best Sonos fix.
- 3
Keep every speaker on one Wi-Fi name.
Settings we'd recommend on the Sky Broadband Hub
- • Turn Sky Broadband Shield off temporarily if a gadget can't finish set-up.
- • Restart the hub, then the gadget — in that order, a couple of minutes apart.
Good to know about this router: Very few settings are exposed, so there is little to change when something misbehaves. Sky Broadband Shield can block set-up pages and some device services.
If none of that works
- Leave the provider's hub doing the broadband and add your own Wi-Fi on top of it — that gives you the settings this hub hides.
- If the gadget only ever sits in one spot, a wired connection is always the most reliable answer.
What owners tell us
No confirmed reports for this pair yet. Yours would be the first.
Reports are counted together and checked by a reviewer before they change anything we publish. One report on its own never becomes an official WiFiXpert conclusion.
Sign in free to add your own reportWhere this comes from
- Sonos — system requirements
- WiFiXpert cases and moderated owner reports for this pair, reviewed September 2026.