Gaming · Checked September 2026
WiFiXpert Compatibility Score — PlayStation 5
Strong Wi-Fi, but downloads and voice chat expose any weakness in the room's coverage.
Usually fine, with a couple of catches
Eight checks, same for every device. The eight numbers below add up to 76.
The eight checks
| What we check | Rating | Points |
|---|---|---|
Works on 2.4 GHz Available, though slow for game downloads. | Supported | 11/14 |
Works on 5 GHz Fast on the 5 GHz band and on 6 GHz where offered. | Excellent | 14/14 |
Modern Wi-Fi security Fine with modern router security. | Good | 11/12 |
Happy on mesh Wi-Fi Stationary, so it settles on one mesh box and stays there. | Very good | 14/16 |
Works on a guest network Online play struggles on guest networks. | Poor | 2/8 |
Survives a plug-in extender Added delay shows up as lag in fast games. | Not recommended | 3/8 |
Doesn't depend on chatty discovery Remote Play needs local discovery; everything else doesn't. | Low dependency | 14/16 |
Easy to fix when it goes wrong The built-in connection test is helpful and gives you real numbers. | Medium | 7/12 |
| WiFiXpert Compatibility Score | 76/100 | |
What usually goes wrong
Game downloads crawl even though the phone in the same room shows fast speeds.
Free things to try, in this order
- 1
Run the console's own internet connection test and note the number — that's your evidence.
- 2
Make sure the console is on the 5 GHz network, not the 2.4 GHz one.
- 3
Move the console out of a closed TV cabinet; metal shelves block Wi-Fi badly.
Before you buy anything
A network cable or powerline adapter to the living room is cheaper and better than a Wi-Fi upgrade.
Answers about this gadget
What it needs from your network
Wi-Fi 5 or Wi-Fi 6 client where steadiness matters far more than raw speed.
- Bands it uses
- Both bands. Use 5 GHz if you can reach it.
- How it's found
- Low, but online play depends on how your router handles incoming connections (what gamers call NAT type).
- Background discovery traffic
- Low.
- On a guest network
- Online play often fails on guest networks.
- On a separate gadget network
- Keep the console on the main network so incoming connections work.
Getting it set up
- • Cable it if the router is in the same room. Nothing else comes close.
- • Otherwise use 5 GHz and keep line of sight.
- • Stand next to your router while you set it up, then move the gadget to where it lives.
- • Put your phone on the 2.4 GHz network name for the setup, or use one name for both bands so the phone can follow.
- • If your router splits bands into two names, turn the 5 GHz one off for five minutes rather than fighting it.
- • Turn mobile data off on your phone during setup — some apps quietly use it and never find the gadget.
With mesh Wi-Fi
- • Wired backhaul helps a lot. Two routers both doing address translation cause strict NAT — that's usually the real fault.
Network notes checked September 2026.
Problem guides for this gadget
Where these ratings come from
- PlayStation Support — connection troubleshooting
- WiFiXpert cases and community reports for this device, checked September 2026.
What we haven't confirmed yet
- Our sources for this one aren't from the maker's own site yet.
- We haven't yet published provider-specific notes for this device.
Nobody pays to appear in this index, and no shopping link changes a score. If a manufacturer changes something that affects a rating, tell us and we'll recheck it.